Danby to Wallingford
Appalachian Trail Section #164

Located 9.6 miles from Rutland, Vermont

4 Stars
21,818 Steps 1  (10.1 mi)

The Appalachian Trail (Section #164) has a maximum elevation of 2,555 ft (779 m), a minimum elevation of 1,094 ft (333 m), and an elevation gain of 28,036 ft (8,545 m) in the [ A to B ] direction.


The following chart shows the total calories that you may expend on the Appalachian Trail Section #164 while hiking in the [ A to B ] and [ B to A ] direction at a typical speed and is based on gross weight (which includes anything carried), the topography, trail length and trail conditions.


We survey thousands of miles of trails each year. The following metrics are based on the most accurate trail data; no crowdsourced data.

[ A to B ] or [ B to A ]
Steps 1Length 2Min Ele 3Max Ele 4
21,81810.1 mi1,094 ft2,555 ft
[ A to B ]
Time 5Floors 6Gain 7Loss 8
4.3 hrs1.028,036 ft24,387 ft
[ B to A ]
4.1 hrs1.424,387 ft28,036 ft

What is the length of the Appalachian Trail Section #164?

The length of the Appalachian Trail Section #164 is 10.1 mi (16.2 km) or 21,818 steps.

How long does it take to hike the Appalachian Trail Section #164?

A person in good physical health can hike the Appalachian Trail Section #164 in 4.3 hrs in the [ A to B ] direction, and in 4.1 hrs in the [ B to A ] direction.

Danby to Wallingford Topo Maps

Download free Danby to Wallingford topo maps and the adjoining quads to plan your hike. These are full-sheet, 7.5 Minute (1:24,000 scale) topographic maps.

Adjoining 7.5 Minute Quadrangle Legend

  1. Northwest Topo Map: Middletown Springs, VT
  2. North Topo Map: Wallingford, VT
  3. Northeast Topo Map: Mount Holly, VT
  4. West Topo Map: Dorset, VT
  5. Topo Map: Danby, VT
  6. East Topo Map: Weston, VT
  7. Southwest Topo Map: Manchester, VT
  8. South Topo Map: Peru, VT
  9. Southeast Topo Map: Londonderry, VT

Is there a Appalachian Trail map for Section #164?

Yes, and they're free! The Appalachian Trail Section #164 is located on the Danby and Wallingford topo maps. Use the adjoining quadrangle legend to download the maps.

KML Custom Maps

AT164T.kmz is a free KML custom map of the Appalachian Trail Section #164 that you can download and view in Google Maps®, Google Earth® and Garmin® handheld GPS devices including the eTrex®, Colorado and Montana series.

Local Weather Forecast

Check the weather forecast; this weather forecast covers the Appalachian Trail Section #164, provided by the National Weather Service. (weather.gov)



  1. Steps is a unit of distance equal to the sum of stride lengths that vary with the terrain.
  2. Length is the distance of the trail between the two trailheads, measured on the trail.
  3. Min Ele is the minimum elevation on the trail.
  4. Max Ele is the maximum elevation on the trail.
  5. Time is the typical total time required to hike the trail.
  6. Floors is the sum of distance on the trail where angles to the horizontal is between 30 and 50 degrees (the angle of a stairway) divided by ten, the height of one floor.
  7. Gain is the cumulative elevation gain.
  8. Loss is the cumulative elevation loss.

Copyright © 1998-2017 pickatrail.com

Pack it In, Pack it Out