Suches to Neels Gap
Appalachian Trail Section #3

Located 9.8 miles from Blairsville, Georgia

4 Stars
22,738 Steps 1  (10.2 mi)

The Appalachian Trail (Section #3) has a maximum elevation of 4,413 ft (1,345 m), a minimum elevation of 2,839 ft (865 m), and an elevation gain of 29,092 ft (8,867 m) in the [ A to B ] direction.


The following chart shows the total calories that you may expend on the Appalachian Trail Section #3 while hiking in the [ A to B ] and [ B to A ] direction at a typical speed and is based on gross weight (which includes anything carried), the topography, trail length and trail conditions.


We survey thousands of miles of trails each year. The following metrics are based on the most accurate trail data; no crowdsourced data.

[ A to B ] or [ B to A ]
Steps 1Length 2Min Ele 3Max Ele 4
22,73810.2 mi2,839 ft4,413 ft
[ A to B ]
Time 5Floors 6Gain 7Loss 8
5.3 hrs4.929,092 ft24,772 ft
[ B to A ]
4.9 hrs5.824,772 ft29,092 ft

What is the length of the Appalachian Trail Section #3?

The length of the Appalachian Trail Section #3 is 10.2 mi (16.4 km) or 22,738 steps.

How long does it take to hike the Appalachian Trail Section #3?

A person in good physical health can hike the Appalachian Trail Section #3 in 5.3 hrs in the [ A to B ] direction, and in 4.9 hrs in the [ B to A ] direction.

Suches to Neels Gap Topo Maps

Download free Suches to Neels Gap topo maps and the adjoining quads to plan your hike. These are full-sheet, 7.5 Minute (1:24,000 scale) topographic maps.

Adjoining 7.5 Minute Quadrangle Legend

  1. Northwest Topo Map: Wilscot, GA
  2. North Topo Map: Mulky Gap, GA
  3. Northeast Topo Map: Coosa Bald, GA
  4. West Topo Map: Noontootla, GA
  5. Topo Map: Suches, GA
  6. East Topo Map: Neels Gap, GA
  7. Southwest Topo Map: Nimblewill, GA
  8. South Topo Map: Campbell Mountain, GA
  9. Southeast Topo Map: Dahlonega, GA

Is there a Appalachian Trail map for Section #3?

Yes, and they're free! The Appalachian Trail Section #3 is located on the Suches and Neels Gap topo maps. Use the adjoining quadrangle legend to download the maps.

KML Custom Maps

AT003T.kmz is a free KML custom map of the Appalachian Trail Section #3 that you can download and view in Google Maps®, Google Earth® and Garmin® handheld GPS devices including the eTrex®, Colorado and Montana series.

Local Weather Forecast

Check the weather forecast; this weather forecast covers the Appalachian Trail Section #3, provided by the National Weather Service. (



  1. Steps is a unit of distance equal to the sum of stride lengths that vary with the terrain.
  2. Length is the distance of the trail between the two trailheads, measured on the trail.
  3. Min Ele is the minimum elevation on the trail.
  4. Max Ele is the maximum elevation on the trail.
  5. Time is the typical total time required to hike the trail.
  6. Floors is the sum of distance on the trail where angles to the horizontal is between 30 and 50 degrees (the angle of a stairway) divided by ten, the height of one floor.
  7. Gain is the cumulative elevation gain.
  8. Loss is the cumulative elevation loss.

Copyright © 1998-2017

Plan Ahead and Prepare