Appalachian Trail Section #110

Located 12.1 miles from Harrisburg, Pennsylvania (PA)

4 Stars
21,143 Steps 1  (10.0 mi)
Appalachian Trail: [ #001 - #212 ]

The Appalachian Trail (Section #110) has a maximum elevation of 613 ft (187 m), a minimum elevation of 420 ft (128 m), and an elevation gain of 22,264 ft (6,786 m) in the [ A to B ] direction.


The following chart shows the total calories that you may expend on the Appalachian Trail Section #110 while hiking in the [ A to B ] and [ B to A ] direction at a typical speed and is based on gross weight (which includes anything carried), the topography, trail length and trail conditions.


[ A to B ] or [ B to A ]
Steps 1Length 2Min Ele 3Max Ele 4
21,14310.0 mi420 ft613 ft
[ A to B ]
Time 5Floors 6Gain 7Loss 8
3.4 hrs0.022,264 ft26,243 ft
[ B to A ]
3.3 hrs0.026,243 ft22,264 ft

What is the length of the Appalachian Trail Section #110?

The length of the Appalachian Trail Section #110 is 10.0 mi (16.1 km) or 21,143 steps.

How long does it take to hike the Appalachian Trail Section #110?

A person in good physical health can hike the Appalachian Trail Section #110 in 3.4 hrs in the [ A to B ] direction, and in 3.3 hrs in the [ B to A ] direction.

Mechanicsburg Pennsylvania Topo Maps

Download free Mechanicsburg Pennsylvania topo maps and the adjoining quads to plan your hike. These are full-sheet, 7.5 Minute (1:24,000 scale) topographic maps. Do you want full-sheet outdoor recreation JPEG Topo Maps?

Adjoining 7.5' Quadrangle Legend

  1. Northwest Topo Map: Shermans Dale, PA
  2. North Topo Map: Wertzville, PA
  3. Northeast Topo Map: Harrisburg West, PA
  4. West Topo Map: Carlisle, PA
  5. Topo Map: Mechanicsburg, PA
  6. East Topo Map: Lemoyne, PA
  7. Southwest Topo Map: Mount Holly Springs, PA
  8. South Topo Map: Dillsburg, PA
  9. Southeast Topo Map: Wellsville, PA

Is there a Appalachian Trail map for Section #110?

Yes, and it's free! The Appalachian Trail Section #110 is located on the Mechanicsburg topo map. Use the adjoining quadrangle legend to download the map.

KML Custom Maps

AT110T.kmz is a free KML custom map of the Appalachian Trail Section #110 that you can download and view in Google Maps®, Google Earth® and Garmin® handheld GPS devices including the eTrex®, Colorado and Montana series.

Local Weather Forecast

Check the weather forecast; this weather forecast covers the Appalachian Trail Section #110, provided by the National Weather Service. (


  1. Steps is a unit of distance equal to the sum of stride lengths that vary with the terrain.
  2. Length is the distance of the trail between the two trailheads, measured on the trail.
  3. Min Ele is the minimum elevation on the trail.
  4. Max Ele is the maximum elevation on the trail.
  5. Time is the typical total time required to hike the trail.
  6. Floors is the sum of distance on the trail where angles to the horizontal is between 30 and 50 degrees (the angle of a stairway) divided by ten, the height of one floor.
  7. Gain (cumulative elevation gain) is the sum of every gain in elevation.
  8. Loss (cumulative elevation loss) is the sum of every loss in elevation.

Copyright © 1998-2017

Pack it In, Pack it Out