Appalachian Trail (Section #1)

Noontootla to Suches
Located 11.4 miles from Dahlonega, Georgia (GA)
4 Stars
22,180 Steps 1  (10.1 mi)
Appalachian Trail: [ #001 - #212 ]


The Appalachian Trail (Section #1) has a maximum elevation of 3,767 ft (1,148 m), a minimum elevation of 2,516 ft (767 m), and an elevation range of 1,251 ft (381 m).


[ A to B ] or [ B to A ]
Steps 1Length 2Min Ele 3Max Ele 4
22,18010.1 mi2,516 ft3,767 ft
[ A to B ]
Time 5Floors 6Gain 7Loss 8
4.4 hrs52.2627 ft1,574 ft
[ B to A ]
4.6 hrs131.21,574 ft627 ft

What is the length of the Appalachian Trail Section #1?

The length of the Appalachian Trail Section #1 is 10.1 mi (16.3 km) or 22,180 steps.

How long does it take to hike the Appalachian Trail Section #1?

A person in good physical health can hike the Appalachian Trail Section #1 in 4.4 hrs in the [ A to B ] direction, and in 4.6 hrs in the [ B to A ] direction.


The following chart shows the total calories that you may expend on the Appalachian Trail Section #1 while hiking in the [ A to B ] and [ B to A ] direction at a typical speed and is based on gross weight (which includes anything carried), the topography, trail length and trail conditions.

Topo Maps

Download the free Noontootla to Suches topo map and the adjoining quads to plan your hike. These are full-sheet, 7.5 Minute (1:24,000 scale) topographic maps. Do you want full-sheet outdoor recreation JPEG Topo Maps?

Adjoining 7.5' Quadrangle Legend

  1. Northwest Topo Map: Blue Ridge, GA
  2. North Topo Map: Wilscot, GA
  3. Northeast Topo Map: Mulky Gap, GA
  4. West Topo Map: Tickanetley, GA
  5. Topo Map: Noontootla, GA
  6. East Topo Map: Suches, GA
  7. Southwest Topo Map: Amicalola, GA
  8. South Topo Map: Nimblewill, GA
  9. Southeast Topo Map: Campbell Mountain, GA

Is there an Appalachian Trail map for Section #1?

Yes, and they're free! The Appalachian Trail Section #1 is located on the Noontootla and Suches topo maps. Use the adjoining quadrangle legend to download the maps.

KML Custom Maps

AT001T.kmz is a free KML custom map of the Appalachian Trail Section #1 that you can download and view in Google Maps®, Google Earth® and Garmin® handheld GPS devices including the eTrex®, Colorado and Montana series.


  1. Steps is a unit of distance equal to the sum of stride lengths that vary with the terrain.
  2. Length is the distance of the trail between the two trailheads, measured on the trail.
  3. Min Ele is the minimum elevation on the trail.
  4. Max Ele is the maximum elevation on the trail.
  5. Time is the typical total time required to hike the trail.
  6. Floors is the gain divided by twelve, the height of one floor.
  7. Gain (cumulative elevation gain) is the sum of every gain in elevation.
  8. Loss (cumulative elevation loss) is the sum of every loss in elevation.