Appalachian Trail (Section #10)

Rainbow Springs to Prentiss
Located 44.5 miles from Brevard, North Carolina (NC)
4 Stars
22,999 Steps 1  (10.3 mi)
Appalachian Trail: [ #001 - #212 ]


The Appalachian Trail (Section #10) has a maximum elevation of 5,160 ft (1,573 m), a minimum elevation of 4,169 ft (1,271 m), and an elevation range of 991 ft (302 m).


[ A to B ] or [ B to A ]
Steps 1Length 2Min Ele 3Max Ele 4
22,99910.3 mi4,169 ft5,160 ft
[ A to B ]
Time 5Floors 6Gain 7Loss 8
5.4 hrs94.21,131 ft791 ft
[ B to A ]
5.2 hrs65.9791 ft1,131 ft

What is the length of the Appalachian Trail Section #10?

The length of the Appalachian Trail Section #10 is 10.3 mi (16.5 km) or 22,999 steps.

How long does it take to hike the Appalachian Trail Section #10?

A person in good physical health can hike the Appalachian Trail Section #10 in 5.4 hrs in the [ A to B ] direction, and in 5.2 hrs in the [ B to A ] direction.


The following chart shows the total calories that you may expend on the Appalachian Trail Section #10 while hiking in the [ A to B ] and [ B to A ] direction at a typical speed and is based on gross weight (which includes anything carried), the topography, trail length and trail conditions.

Topo Maps

Download the free Rainbow Springs to Prentiss topo map and the adjoining quads to plan your hike. These are full-sheet, 7.5 Minute (1:24,000 scale) topographic maps. Do you want full-sheet outdoor recreation JPEG Topo Maps?

Adjoining 7.5' Quadrangle Legend

  1. Northwest Topo Map: Topton, NC
  2. North Topo Map: Wayah Bald, NC
  3. Northeast Topo Map: Franklin, NC
  4. West Topo Map: Shooting Creek, NC
  5. Topo Map: Rainbow Springs, NC
  6. East Topo Map: Prentiss, NC
  7. Southwest Topo Map: Macedonia, GA
  8. South Topo Map: Hightower Bald, GA
  9. Southeast Topo Map: Dillard, GA

Is there an Appalachian Trail map for Section #10?

Yes, and they're free! The Appalachian Trail Section #10 is located on the Rainbow Springs and Prentiss topo maps. Use the adjoining quadrangle legend to download the maps.

KML Custom Maps

AT010T.kmz is a free KML custom map of the Appalachian Trail Section #10 that you can download and view in Google Maps®, Google Earth® and Garmin® handheld GPS devices including the eTrex®, Colorado and Montana series.


  1. Steps is a unit of distance equal to the sum of stride lengths that vary with the terrain.
  2. Length is the distance of the trail between the two trailheads, measured on the trail.
  3. Min Ele is the minimum elevation on the trail.
  4. Max Ele is the maximum elevation on the trail.
  5. Time is the typical total time required to hike the trail.
  6. Floors is the gain divided by twelve, the height of one floor.
  7. Gain (cumulative elevation gain) is the sum of every gain in elevation.
  8. Loss (cumulative elevation loss) is the sum of every loss in elevation.