Stone Pile Gap Trail

Great Smoky Mountains National Park
Located 41.9 miles from Brevard, North Carolina (NC)
4 Stars
2,066 Steps 1  (0.9 mi)


The Stone Pile Gap Trail has a maximum elevation of 2,543 ft (775 m), a minimum elevation of 2,057 ft (627 m), and an elevation range of 486 ft (148 m).


[ A to B ] or [ B to A ]
Steps 1Length 2Min Ele 3Max Ele 4
2,0660.9 mi2,057 ft2,543 ft
[ A to B ]
Time 5Floors 6Gain 7Loss 8
34 min44.0528 ft52 ft
[ B to A ]
25 min4.352 ft528 ft

What is the length of the Stone Pile Gap Trail?

The length of the trail is 0.9 mi (1.5 km) or 2,066 steps.

How long does it take to hike the Stone Pile Gap Trail?

A person in good physical health can hike the trail in 34 min in the [ A to B ] direction, and in 25 min in the [ B to A ] direction.


The following chart shows the total calories that you may expend on the trail while hiking in the [ A to B ] and [ B to A ] direction at a typical speed and is based on gross weight (which includes anything carried), the topography, trail length and trail conditions.

Topo Maps

Download the free Stone Pile Gap Trail topo map and the adjoining quads to plan your hike. These are full-sheet, 7.5 Minute (1:24,000 scale) Great Smoky Mountains National Park topographic maps. Do you want full-sheet outdoor recreation JPEG Topo Maps?

Adjoining 7.5' Quadrangle Legend

  1. Northwest Topo Map: Silers Bald, NC
  2. North Topo Map: Clingmans Dome, NC
  3. Northeast Topo Map: Smokemont, NC
  4. West Topo Map: Noland Creek, NC
  5. Topo Map: Bryson City, NC
  6. East Topo Map: Whittier, NC
  7. Southwest Topo Map: Wesser, NC
  8. South Topo Map: Alarka, NC
  9. Southeast Topo Map: Greens Creek, NC

Is there a Stone Pile Gap trail map?

Yes, and it's free! The Stone Pile Gap Trail is located on the Bryson City topo map. Use the adjoining quadrangle legend to download the map.



  1. Steps is a unit of distance equal to the sum of stride lengths that vary with the terrain.
  2. Length is the distance of the trail between the two trailheads, measured on the trail.
  3. Min Ele is the minimum elevation on the trail.
  4. Max Ele is the maximum elevation on the trail.
  5. Time is the typical total time required to hike the trail.
  6. Floors is the gain divided by twelve, the height of one floor.
  7. Gain (cumulative elevation gain) is the sum of every gain in elevation.
  8. Loss (cumulative elevation loss) is the sum of every loss in elevation.